chevron_left
chevron_right
HUAWEI AirEngine5761-11 11ax indoor2+2 dual bandssmart antennaUSBBLE
HUAWEI AirEngine5761-11 11ax indoor 2+2 dual bands smart antenna USB BLE
 |
||
| Manufacturer | HUAWEI TECHNOLOGIES | |
| Manufacturer Part No | 02353VUR | |
| General | |
| Device Type | Radio access point |
| Ruggedized Design | Indoor |
| Width | 22 cm |
| Depth | 22 cm |
| Height | 5 cm |
| Weight | 1.05 kg |
| Networking | |
| Form Factor | External |
| Connectivity Technology | Wireless |
| Data Transfer Rate | 1.775 Gbps |
| Line Coding Format | 1024 QAM, OFDMA |
| Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, Bluetooth 5.0, IEEE 802.11ax (Wi-Fi 6) |
| Network / Transport Protocol | NTP, DNS, SFTP, HTTP, HTTPs, IPv6, Telnet |
| Routing Protocol | GRE |
| Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, HTTP, HTTPS, SSH-2, Web NMS, SFTP, STelnet, NTP, RADIUS |
| Cloud-Managed | Yes |
| Frequency Band | 2.4 GHz, 5 GHz |
| Performance | Maximum data rate (2.4 GHz): 575 Mbps Maximum data rate (5 GHz): 1.2 Gbps |
| Capacity | Maximum number of configured SSIDs: 16 Maximum number of users: 1024 |
| Status Indicators | Status |
| Features | NAT support, Wi-Fi Multimedia (WMM) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), hidden SSID, Dynamic ARP Inspection (DAI), LLDP support, Maximum Ratio Combining (MRC), CAPWAP support, Low Density Parity Check (LDPC), DHCP client, Cyclic Delay Diversity (CDD), Space Time Blocking Code (STBC), cyclic shift diversity (CSD), Unscheduled Automatic Power Save Delivery (U-APSD), IP source guard, beamforming technology, protected management frames, MAC address authentication, Dynamic Frequency Selection (DFS), Signal Sustain Technology (SST), Extended Service Set (ESS), 2x2 MU-MIMO technology, Short Guard Interval, IPv6 Source Address Validation Improvements (SAVI), Target Wait Time (TWT), Spectrum Analysis, High Density Boost technology, SmartRadio, Media Dependent Interface (MDI), Media Dependent Interface Crossover (MDI-X), mDNS |
| Encryption Algorithm | AES, 128-bit WEP, 64-bit WEP, 154-bit WEP, TKIP, WPA, WPA2, WPA-PSK, WPA2-PSK, WEP, WAPI, WPA3, Simultaneous Authentication of Equals (SAE), WPA3-SAE, 192-bit WEP |
| Authentication Method | RADIUS, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP) |
| Compliant Standards | IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3af, IEEE 802.11d, IEEE 802.1x, IEEE 802.11h, IEEE 802.11e, IEEE 802.11k, IEEE 802.3at, IEEE 802.11w, IEEE 802.11r, IEEE 802.11v |
| Aerial | |
| Antenna | Internal |
| Internet of Things (IoT) | |
| Internet of Things (IoT) Compatible | Yes |
| Communications Technology | RFID, Zigbee |
| Expansion / Connectivity | |
| Interfaces | 1 x 1000Base-T (PoE+) - RJ-45 1 x USB |
| Miscellaneous | |
| Compliant Standards | CISPR 24, EN55022, ICES-003, IEC 61000-4-2, IEC 61000-4-6, EN55024, CISPR 22, RSS-210, RSS-102, FCC Part 15, FCC Part 2, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 4268, GB 4943, GB 17625.1, Directive 2002/95/EC, Directive 2011/65/EU, GB 9254, AS/NZS CISPR 22, ITU-T K.20, WEEE 2002/96/EC, WEEE 2012/19/EU, EN 301 489-1, EN 62368-1, IEC 62368-1, ETSI EN 300 328, ETSI EN 301 893, UL 62368-1, OET 65, CENELEC EN 50385, CENELEC EN 62311, ETSI EN 60601-1-2, Directive 1907/2006/EC, EN 301 489-17, YD/T 1312.2-2004, FCC Part 1, FCC KDB, CAN/CSA C22.2 No. 60950-1 |
| Power | |
| Power Over Ethernet (PoE) Supported | PoE+ |
| Power Device | External power adapter |
| Voltage Required | DC 12 V |
| Power Consumption Operational | 15.3 Watt |
| Environmental Parameters | |
| Min Operating Temperature | -10 °C |
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 5 - 95% (non-condensing) |
02353VUR